B4000 SE Cab Plus 2WD V6-4.0L OHV (1998)
Fog/Driving Lamp Switch: Service and Repair
1. Pull out the center finish panel.
2. Disconnect the radio finish panel connectors.
3. Remove the fog lamp switch.
1. Remove the screws.
2. Remove the switch bracket.
3. Release the tabs and remove the fog lamp switch.
4. Install in reverse order of removal.
Tightening torque: 2 - 3 N.m (20 - 31 kgf.cm, 18 - 26 in.lbf)