B4000 SE Cab Plus 2WD V6-4.0L OHV (1998)
Crankshaft Position Sensor: Service and Repair
1. Disconnect negative battery cable.
2. Raise and support the vehicle.
3. Disconnect crankshaft position sensor connector.
4. Remove crankshaft position sensor.
5. Install in reverse order of removal.
NOTE: Push sensor against pulley wheel to ensure both wearpads are in contact with pulley wheel. Tighten bolts to specified torque.
Torque: 8-12 Nm (82-122 kgf/cm 71-106 in.lbs.)