B4000 SE Cab Plus 2WD V6-4.0L OHV (1998)
CAUTION: Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
7. Press the transmission case (16 pinch) electrical connector through the case until a click is heard.
8. Install the TSS sensor wire.
1) Install the TSS sensor wire into (16 pinch) electrical connector.
2) Install the TSS sensor wire into locator.
CAUTION: Do not overstretch the retaining spring.
9. Install the transmission case (16 pinch) electrical connector retaining spring.
10. Install the EPC, CCS/SS4, and SS2 solenoids.
CAUTION: The solenoid clamp must be installed in the TCC and EPC solenoid grooves, shift solenoid pockets and the No. 204 plug.