B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Note
When sliding new J-clips onto the frame, be sure to align them with holes in frame.
3.
Install the crossmember using the bolts provided in the kit and torque mounting bolts.
Tightening torque
4X2 M10 bolts:
65-85 N-m (48-62 ft-lbf}
4X4 M10 bolts:
59.5-80.5 N-m (43-59 ft-lbf}
4X4 M12 bolts:
143-159 N-m (105-117 ft-lbf}
Note
^
4WD vehicles only, be sure to install the provided spacers in the C-channel of the crossmember.
PART(S) INFORMATION
WARRANTY INFORMATION
Note
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty
term information.
Warranty Type
A
Symptom Code
92