B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Cruise Control Servo: Service and Repair
1. Disconnect the battery negative cable.
2. Remove in order shown in figure.
-
Connector.
-
Cable.
-
Bolt.
-
Servo.
3. Install in reverse order of removal.
Cruise Control Actuator Cable Removal Note
1. Depress the cruise control actuator cable cap tab inward and twist the actuator cap counterclockwise to remove.
Cruise Control Actuator Cable Installation Note
1. Lock the cable ball slug into the slot located in the servo rotor.
NOTE: Be sure white indicator mark is visible on cruise control actuator cable for proper routing.
2. Pull the cable taut at the throttle body end.
