B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
drive belt noise may return (with mileage) if one of the above conditions still exists uncorrected.
^
With engine running, visually observe the grooves in the pulleys (not the pulley flanges) for excessive wobble. Replace components as required.
^
Check all accessories, mounting brackets and belt tensioner, for any interference that would prevent the component from mounting properly.
Correct any interference condition. Recheck belt tracking.
^
Tighten all accessories, mounting brackets and belt tensioner retaining hardware to specification. Recheck drive belt tracking.