B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Oil Filter: Service and Repair
OIL FILTER REPLACEMENT
1. Remove the oil filter from the oil adapter.
2. Clean the cylinder block mating surface.
3. Apply a small amount of clean engine oil to the oil gasket of the new filter.
4. Install the oil filter and tighten it by hand until the oil gasket contacts the adapter.
5. Tighten the filter 1/2 turn.
6. Start the engine and check for leaks.
7. Check oil level and add if necessary.
