B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
14. Disconnect the crankshaft position sensor.
15. Disconnect the engine control sensor wiring from the:
(1).ECT sensor
(2).water temperature indicator sender unit.
16. Disconnect the fuel injectors.
17. Disconnect the camshaft synchronizer.
18. Disconnect the oil pressure sensor.
19. Disconnect the vacuum line and remove the vacuum line harness.
20. Remove the bolt.
21. Disconnect the fuel line.
22. Remove the stud bolts.
23. Remove the fuel injection supply manifold and remove the fuel injectors. Remove and discard the gasket.
INSTALLATION
1. Position the fuel injection supply manifold and the fuel injectors as an assembly.
(1).Install a new gasket.
(2).Position the fuel injection supply manifold.
