B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
3.
Align and tighten the clamps to secure the heat shield/shields in place.
Tightening torque
6.8 Nm (60 lb-in)
4.
Trim the excess "ear" of the clamp to approximately 1" (2.54 cm).
5.
Verify repair.
PART(S) INFORMATION
Part Number
Description
Qty.
Notes
ZZL0 13 458
Worm Clamp
2 or 4
---
WARRANTY INFORMATION
Note
^
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty term
information.
Warranty Type
A
Symptom Code
82
Damage Code
97
Part Number Main Cause
ZZL0 13 458
Quantity
2 or 4
Operation Number / Labor Hours
YY0066RX / 0.4