B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
3. Connect the six solenoid electrical connectors.
1) Connect shift solenoid electrical connectors.
2) Connect the TCC solenoid electrical connector.
3) Connect the EPC solenoid electrical connector.
Caution: Excessive pressure may break the retaining pins.
4. Install the main control valve body wire loom.
1) Align the retaining pins to the holes in the solenoid clamps and gently press in the main control valve body wire loom guide and protector.
5. Install the (1) oil strainer.
6. Install the (2) bolt.
7. Position a new gasket on the oil pan.