B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
8. Remove the lower steering column shroud.
1. If equipped, remove the tilt wheel handle and shank.
2. Remove the three screws.
3. Remove the lower steering column shroud.
9. Remove the lock cylinder.
10. Remove the upper steering column shroud.
11. Remove the passive anti-theft system (PATS) transmitter.
1. Remove the PATS transmitter retaining screw.
2. Position the PATS transmitter aside.
12. Remove the key-in-ignition warning indicator switch.
13. Remove the two air bag sliding contact wire connectors from the wire connector bracket and disconnect them.
