B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
^
Make sure the tab is in the lock position.
^
Install new O-rings on the transmission case (16 pin) electrical connector.
6. Install the transmission case (16 pin) electrical connector.
^
Lubricate the transmission case (16 pin) electrical connector O-rings with petroleum jelly.
Caution: Align the slot on the TSS sensor electrical connector with the slot in the 16 pin case connector.
7. Press the transmission case (16 pin) electrical connector through the case until a click is heard.
8. Install the TSS sensor wire.
1) Install the TSS sensor wire into (16 pin) electrical connector.
2) Install the TSS sensor wire into locator.
Caution: Do not overstretch the retaining spring.
9. Install the transmission case (16 pin) electrical connector retaining spring.
