B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
3.
Inspect for a damaged bracket that attaches the Torque Converter Clutch (TCC), EPC, and two (2) shift solenoids to the main control body.
-
If the solenoid bracket is damaged (i.e. broken, bent, etc.), replace both the bracket and EPC solenoid.
-
If the solenoid bracket is not damaged, inspect the EPC solenoid for its date code (refer to table). Replace the solenoid if its date code matches
a code listed or is unreadable.
4.
Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
Note
^
This information applies to verified customer complaints on vehicles covered under normal warranty. Refer to the SRT microfiche for warranty
term information.
DISCLAIMER