B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
17. Install the spring and detent spring bolt.
18. Install the reverse servo piston and rod.
19. Check the reverse piston travel.
20. Install a new gasket and reverse piston cover and tighten in order shown.
21. Connect the six solenoid connectors to the solenoids.
1) SS1, SS2, SS3 and CCS/SS4 solenoids
2) TCC solenoid
3) EPC solenoid
Note: The wiring guide snaps into place on the solenoid retainers.
