B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
8. Connect the TCC, CCS/SS4, SS2, and EPC solenoid electrical connectors.
Caution: Excessive pressure may break the retaining pins.
9. Install the wire harness guide and protector.
1) Align the retaining pins to the holes in the solenoid clamps and gently press in the wire harness guide and protector.
10. Install the oil strainer and bolt.
11. Install the oil pan.
1) Position a new oil pan gasket on the oil pan.
2) Align and install the oil pan.
12. Loosely install the 18 oil pan bolts.
