B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
11. Remove the inner differential bearing cup with Driver Handle SST 49 F027 003 and Pinion Bearing Cup Replacer SST 49 UN01 035.
Installation Note
1. Position Pinion Bearing Cup Replacer SST 49 UN01035 and the inner and outer bearing cups in their respective bores.
1) After placing the inner and outer bearing cups in their bores, place SST 49 UN01 035 (inner) on the inner pinion bearing cup.
2) Place SST 49 UN01 035 (outer) on the outer pinion bearing cup.
3) Install SST 49 UN01 035.
2. Tighten SST 49 UN01 035 to seat the pinion bearing cups into their bores.
Note: Steps 3 and 4 are an alternate method of performing Steps 1 and 2.
3. Drive the outer pinion bearing cup into the axle housing using Driver Handle SST 49 F027 003 and Pinion Bearing Cup Replacer SST 49 UN01
035.