B4000 SE Regular Cab 4WD V6-4.0L OHV (1999)
Companion Flange: Testing and Inspection
Companion Flange Runout Check
COMPANION FLANGE CIRCULAR RUNOUT CHECK
Caution: Pinion bearing preload must be reset if the pinion nut has been loosened or removed for pinion flange reindexing or replacement.
1. Raise the vehicle on a twin-post hoist that supports the rear axle.
2. Remove the propeller shaft.
3. Check the companion flange for damage.
4. Position Companion Flange Runout Gauge SST 205-319 (T92L-4851 -B) or equivalent on the companion flange.
5. Position Clamp Plate SST 205-320 (T92L-4851 -C) onto Companion Flange Runout Gauge SST 205-319 (T92L-4851-B).
6. Align the holes on SST 205-320 (T92L-4851-C) with the holes in the flange and install the bolts. Snug the bolts evenly.