B Series Truck L4-2000 1998cc (1986)
CHOKE PULL-OFF ANGLE ADJUSTMENT
9.
Adjust the choke pull-off angle as follows:
a)
Hold the choke valve fully closed.
b)
Apply a vacuum of about 400 mm Hg (15.7 in. Hg) to the diaphragm and check clearance (R) as shown.
Clearance (R):
1.95 +/- 0.25 mm (0.077 +/- 0.010 in.)
c)
If the clearance is not within the standard value, adjust it by bending the choke lever.
10.
Reconnect the vacuum hose to the diaphragm.