B Series Truck 2WD L4-2184cc 2.2L 2200 2-bbl (1990)
Fig. 22 Cruise Control Unit Connector. Except MX-6, 626 & 929
Fig. 23 Cruise Control Unit Connector. MX-6, 626 & 929
Fig. 25 System Check Chart
1.
Locate cruise control unit connector.
2.
Connect a 1.4 watt test lamp between terminals shown with connector attached to the control unit, Figs. 22 and 23.
3.
Turn ignition switch to the On position.
4.
Turn Resume/Accel switch and Main switch On together to activate system inspection.
5.
Operate each switch as described in Fig. 25 and verify the operation codes.
6.
Press Main switch to deactivate the system inspection.
