B Series Truck 2WD L4-2184cc 2.2L 2200 2-bbl (1990)
Oxygen Sensor: Service and Repair
Fuel Injection
Oxygen Sensor
REMOVAL
1.
Disconnect harness terminal.
2.
Remove sensor with suitable socket or wrench.
INSTALLATION
1.
Apply a thin coating of anti-seize compound to threads.
NOTE: Do not contaminate sensing tip with compound.
2.
Install sensor and torque it to 22 - 36 ft lb (29 - 49 Nm).
3.
Apply a thin coating of dielectric compound to connector.
4.
Connect harness terminal.
