B Series Truck 2WD L4-2184cc 2.2L 2200 2-bbl (1990)
Power Steering Pump: Service and Repair
Power steering pump
1. Oil pump drive belt
Check for damage or wear
2. Locknut
3. Oil pump pulley
4. Key
5. Bolt and washer
6. Pressure hose
7. Return hose
8. Bolt, washer, and nut
9. Bolt and washer
10. Oil pump assembly
Check for damage or deformation
Removal and installation
1. Jack up front of the vehicle and support with jack stands.
2. Remove in the order shown in the figure, refering to Removal Note
3. Install in reverse order of removal.
4. Inspect the oil pump and drive belt components and repair or replace as necessary.
Note:
a) The power steering fluid will leak out when the return hose and/or the pressure hose is disconnected. Prepare a suitable container for it to
drain into.
b) After installation:
1. Check the oil pump drive belt (tension) and adjust as necessary