B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
6. Install adjusters and balancer chain.
7. Tighten the idler sprocket assembly lock bolt.
Tightening torque: 38-51 N.m {3.8-5.3 kgf.m, 28-38 ft.lbf}
8. Install the spacer.
Adjustment of balancer chain tension
1. Fabricate a piece of hard wood as shown.
2. Insert the piece of hardwood in the notch in chain guide C.
3. Push chain guide C with a force of 13-16 N {1.3-1.7 kgf, 2.9-3.7 lbf} and tighten adjusting bolt (2) and bolt (1).
Tightening torque: 7.9-10.7 N.m {80-110 kgf.cm, 70-95.4 in.lbf}
4. Remove the wood from between the chain and chain guide C.
Caution: Do not leave any wood shavings around the chain and chain guide.