mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Control Assembly, HVAC > < Compressor Relay|Page 3918
Page 1
background image

Condenser Fan Motor: Service and Repair

1.

Disconnect battery ground.

2.

On RX-7, remove coolant reservoir, plastic clips and upper duct covers.

3.

All models except RX-7, remove grille assembly.

4.

On all models except 323, remove hood lock assembly.

5.

On all models, disconnect fan connector. Remove bolts and fan assembly.

6.

Reverse procedure to install.

Control Assembly, HVAC > < Compressor Relay|Page 3918