B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
.004 inch by inserting appropriate shims.
5.
Turn the worm shaft and place the rack in the center position of the worm in the gear housing. Insert the sector shaft and adjusting screw into the
gear housing, being careful not to damage the bushes and oil seal. Ensure center of the sector gear is in alignment with the center of the racks.
6.
Place the side cover and the gasket onto the adjusting screw and turn the adjusting screw counterclockwise until properly positioned.
7.
Install and tighten side cover attaching bolts.
8.
Adjust the backlash between the sector gear and rack. Backlash should be 0-.004 inch.
9.
Install the pitman arm onto the sector shaft, aligning the identification marks of the pitman arm and sector shaft. Install the pitman arm attaching
nut.
