B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
1. Brake band
2. Band strut
3. OD band servo cover
4. Gasket
5. Nut
6. Washer
7. Body
8. Piston stem
9. Piston assembly
10. Seal rings
11. O-rings
1. Apply ATF to the piston stem.
2. Adjust the 2nd brake band.
(1) Loosen the locknut and tighten the piston stem.
Tightening torque: 11.8-14.7N.m (1.2-1.5 m-kg, 8.7-10.8 ft-lb)
(2) Loosen the stem the number of turns shown below.
Stem: 3 turns
(3) Hold the stem and tighten the locknut.
Tightening torque: 15-39 N.m (1.5-4.0 m-kg, 11-29 ft-lb)
Caution: Apply air for no more than three(3) seconds. Check the servo piston operation by applying compressed air through the oil passages of the
2nd band servo.
A: Engage
