B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
Propeller shaft (4x2)
Before removing the propeller shaft, mark the flanges for correct installation.
Propeller shaft (4x4)
Before removing the propeller shaft mark on the front, and rear side flanges for correct installation.
(4x2 Model)
When the propeller shaft is removed from the extension housing, immediately install the SST into the extension housing to prevent oil leakage.
B2200: 49 0259 440
B2600i: 49 S120 440
Propeller shaft
1. Align the marks, and install the rear propeller shaft.
Tightening torque: 49-59 N.m (5.0-6.0 m-kg, 36-43 ft-lb)
2. Install the center bearing support assembly.
Tightening torque: 36-53 N.m (3.7-5.4 m-kg, 27-39 ft-lb)