B Series Truck 4WD L4-2606cc 2.6L SOHC (1992)
11. Disconnect the stabilizer and lower side of the shock absorber mounting.
12. Support the lower arm with a jack.
13. After removing the lower arm ball joint nut, separate the knuckle from the lower arm with the SST.
14. After removing the upper arm ball joint nut, separate the knuckle from the upper arm with the SST.
15. After removing the upper arm ball joint nut, separate the knuckle from the upper arm with the SST.
16. Lower the lower arm, and remove the knuckle.
INSPECTION
Inspect for the following problems, and replace any faulty parts.
1. Cracks and damage to knuckle.
2. Wear and rust of oil seal friction surface.