CX-7 AWD L4-2.3L Turbo (2008)
Antenna - Keyless Entry: Service and Repair
KEYLESS ANTENNA REMOVAL/INSTALLATION [ADVANCED KEYLESS SYSTEM]
Exterior, LF/RF
1. Disconnect the negative battery cable.
2. Remove the door trim.
3. Remove the screws.
4. Disconnect the connector, then remove the keyless antenna.
5. Install in the reverse order of removal.
Exterior, Rear
1. Disconnect the negative battery cable.
2. Remove the bolts.
3. Disconnect the connector, then remove the keyless antenna.
4. Install in the reverse order of removal.
Interior, Front
1. Disconnect the negative battery cable.
2. Remove the glove compartment.
3. Disconnect the connector, then remove the screws.
4. Remove the keyless antenna.
5. Install in the reverse order of removal.
Interior, Middle
1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the clips.