CX-7 AWD L4-2.3L Turbo (2008)
Oil Filter: All Technical Service Bulletins
Engine - Oil Filter Element Replacement Precautions
Bulletin No.: 01-035/08
Last Issued: 07/07/2008
Subject:
ENGINE OIL FILTER CARTRIDGE HOUSING COVER DAMAGE
BULLETIN NOTE:
This bulletin supersedes the previous bulletin 01-046/04 issued on 12/23/04. The APPLICABLE MODEL(S)/ VINS and REPAIR INFORMATION
has been revised.
APPLICABLE MODEL(S)/VINS
2003-2008 Mazda6 2.3L
2004-2008 Mazda3 2.3L
2006-2008 Mazda5
2007-2008 Mazdaspeed3
2006-2007 Mazdaspeed6
2007-2008 CX-7
DESCRIPTION
The applicable models listed in this bulletin incorporate an oil filter cartridge that is housed within the engine. If the oil filter cartridge housing cover is
not removed and/or installed using the correct tool, damage to the sides or bottom of the plastic cover may occur. Engine oil leakage or severe engine
damage may occur if the damage is excessive.
REPAIR PROCEDURE
Use Oil Filter Wrench (SST AKS75140 - 75.6 mm x 14 Flutes) for oil filter cartridge housing cover removal.
NOTE:
^
SST AKS75140 is contained in Oil Filter Wrench Set (SST AKS96085).
^
SST AKS75140 has a plated finish for easy identification.
WARNING:
^
Remove and install all parts when the engine is cold, otherwise, they can cause severe burns or
