CX-7 AWD L4-2.3L Turbo (2008)
3. At location (A), insert a plain washer (C) between the rear bumper cover (E) and the vehicle body (B).
4. Replace two (2) fasteners (D) with new ones.
5. Verify repair.
PART(S) INFORMATION
WARRANTY INFORMATION
NOTE:
^ This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair.
^ This repair will be covered under Mazda's New Vehicle Limited Warranty term.
^ Additional diagnostic time cannot be claimed for this repair.
Technical Service Bulletin # 0904509
Date: 090817
Body - Rear Bumper Rattles At Highway Speeds
Bulletin No: 09-045/09
Last Issued: 08/17/2009
Subject
RATTLE NOISE FRONT REAR BUMPER
APPLICABLE MODEL(S)/VINS
2007-2010 CX-7
