CX-7 AWD L4-2.3L Turbo (2008)
Headliner: Service and Repair
HEADLINER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:
1. A-pillar lower trim
2. A-pillar trim
3. Front scuff plate inner
4. Rear scuff plate inner
5. B-pillar lower trim
6. Front seat belt upper anchor installation bolt
7. B-pillar upper trim
8. Rear seat
9. Sub trunk box
10. Trunk end trim
11. Trunk side trim
12. C-pillar trim
13. D-pillar trim
14. Map light
15. Sunvisor
16. Assist handle
4. Disconnect the rear washer hose.
5. Disconnect the roof harness connector.
6. Remove the fasteners.
7. Remove the sunroof seaming welt (vehicles with sunroof only)
8. Take the headliner out from the opened liftgate.
9. Install in the reverse order of removal.