CX-7 AWD L4-2.3L Turbo (2008)
Roof Rack Insulator: Service and Repair
ROOF CARRIER BRACKET REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Partially peel back the seaming welt.
3. Remove the following parts:
1. A-pillar lower trim
2. A-pillar trim
3. Front scuff plate inner
4. Rear scuff plate inner
5. B-pillar lower trim
6. Front seat bell upper anchor installation bolt
7. B-pillar upper trim
8. Rear seat
9. Sub trunk box
10. Trunk end trim
11. Trunk side trim
12. C-pillar trim
13. D-pillar trim
14. Map light
15. Sunvisor
16. Assist handle
17. Headliner
4. Remove the nuts.
5. Remove the roof carrier bracket.
6. Install in the reverse order of removal.
NOTE: Install the roof carrier bracket so that the arrow on it faces inward.
