CX-7 AWD L4-23L Turbo (2008) - Seat Cover Replacement Procedure
4. Open the fastener (A).
5. Pull the side air bag harness (B) to the direction of (4) and pull it out from the through hole on the trim and the pad (C).
6. Strip off the trim, press the pole guides (D) to the direction of (5) to disengage the clip fixing, and pull them out to the direction of (6).
7. Remove the nut (E).
8. Push the holder bracket (F) into the pad.
CAUTION:
Be careful not to pinch the bracket in the frame spring (G).
