CX-7 AWD L4-2.3L Turbo (2008)
4. Remove the lift lever.
NOTE:
Be sure to remove the lift lever and inner cover as an assembly.
a. Remove the snap ring.
b. Pull the lift lever upward and hold it up.
c. Using a flat blade screwdriver, push down on the lower spring through the opening in the side cover.
NOTE:
Be careful not to damage the side cover.
d. Pull the lift lever outward to remove it from the shaft.
5. Release the engagement of the front side hooks of the side cover by pushing the side cover back from the front, then pulling out.
NOTE:
