CX-7 AWD L4-2.3L Turbo (2008)
Caution
^
If the dashboard is moved towards the vehicle rear excessively, the wiring harness could be damaged. Mark the position and verify
the distance when moving the dashboard.
13. Move the power brake unit to the vehicle front where the power brake unit fork does not interfere with the brake pedal arm.
14. Remove the brake pedal.
Brake Switch Installation Note
1. Inspect the brake pedal. (See BRAKE PEDAL INSPECTION.) See: Testing and Inspection
2. With the brake pedal fully released, insert a new brake switch into the installation hole on the lock unit.
3. Secure the brake switch by turning it counterclockwise 45°.
Brake Switch Connector Installation Note
1. Inspect the brake pedal.
2. With the brake pedal in its original position, install the brake switch to the brake switch connector.
