CX-7 AWD L4-2.3L Turbo (2008)
Radiator Cooling Fan Motor: Testing and Inspection
FAN MOTOR INSPECTION [L3 WITH TC]
Part Inspection
1. Verify that the battery is fully charged.
2. Remove the charge air cooler duct.
3. Disconnect the cooling fan motor connector (2 terminals).
4. Install a tester and battery to the cooling fan motor connector (2 terminals) as shown in the figure.
5. Verify that each fan motors operate smoothly at the standard current.
^
If there is any malfunction, replace the applicable part.
Cooling fan motor No.1, No.2 standard current 17.5 - 22.5 A
