CX-7 AWD L4-2.3L Turbo (2008)
5. Remove the crankshaft pulley installation bolt (M6 X 1.0).
6. Remove the SST from the camshaft.
7. Remove the SST installed in the cylinder block lower blind plug hole.
8. Rotate the crankshaft clockwise two turns and inspect the valve timing.
^
If not aligned, repeat from Step 1.
9. Install the cylinder block lower blind plug.
Tightening torque
18-22 Nm (1.9-2.2 kgf-m, 14-16 ft-lbf)
