CX-7 AWD L4-2.3L Turbo (2008)
1. Loosen the cylinder head cover bolts in the order shown in the figure.
Crankshaft Pulley Lock Bolt Removal Note
1. Rotate the crankshaft in the direction of the engine rotation and remove the cylinder block lower blind plug when the No. 1 cylinder is at the point
prior to top dead center (TDC) of compression, then install the SST.
2. Rotate the crankshaft in the direction of the engine rotation so that the No. 1 piston is at TDC of the compression stroke. (Until the crank weight
contacts SST and stops.)
3. Install the SST to the crankshaft pulley and lock the crankshaft against rotation.
No.3 Engine Mount Removal Note
1. Remove the windshield wiper arm and blade.
2. Remove the cowl grille.
3. Remove the air cleaner and air cleaner bracket.
