CX-7 AWD L4-2.3L Turbo (2008)
3. Release the ratchet with the plunger still pressed down.
4. Press-in the plunger until the ratchet position is as indicated in the figure, and then insert the wire to lock the plunger.
Oil Pump Driven Sprocket Removal Note
1. Temporarily install the crankshaft pulley and crankshaft pulley lock bolt to the crankshaft, and lock the oil pump against rotation as shown in
figure.
2. Remove the oil pump driven sprocket, and then remove the crankshaft pulley and crankshaft pulley lock bolt.
Oil Pump Drive Sprocket Installation Note
1. The oil pump drive sprocket has the assembly direction as shown in the figure.
