CX-7 AWD L4-2.3L Turbo (2008)
1. Apply approx.
1 g {0.04 oz} of silicone (Shin-Etsu Silicone KE-347W or similar) to the contact surface of the thermal protector, then thoroughly
install it onto the A/C compressor, leaving no gaps.
Screw Installation Note
1. When installing a new stator and thermal protector, replace the screw.
Clamp Installation Note
1. When installing a new stator and thermal protector, replace the clamp.
Snap Ring Installation Note
1. When installing a new pressure plate, A/C compressor pulley, stator, or A/C compressor body, replace the snap ring.
