CX-7 AWD L4-2.3L Turbo (2008)
1. Set the SST.
2. While looking through the inspection hole of the SST, insert the protruding part of the SST until it makes contact with the cage section.
3. Use the SST to disconnect the male pipe or hose from the female by pulling the male pipe or hose.
NOTE: The male pipe or hose can be disconnected easily from the female pipe by pulling from the male pipe or hose while maintaining the
pressure of the protruding part of the SST.
Refrigerant Line Installation Note
1. When installing a new cooler pipe or cooler hose, add a supplemental amount of ATMOS GU10 compressor oil into the refrigeration cycle.
Supplemental amount (approx. quantity)
5 ml {5 cc, 0.2 fl oz}: Cooler pipe
10 ml {10 cc, 0.3 fl oz}: Cooler hose
2. Apply compressor oil to the O-rings and connect the joints.
3. Tighten the joints.
Spring-lock coupling type
