CX-7 AWD L4-2.3L Turbo (2008)
9.
Note application date in service record.
1998-2003 Miata
1999-2005 Miata
1.
Dry the evaporator using the following procedure:
WARNING:
Running the engine inside an enclosed area, such as a garage, is dangerous. Exhaust gas, which contains poisonous carbon monoxide, could
easily enter the cabin. Loss of consciousness or even death could occur. Don't run the engine when inside an enclosed area.
A.
Start the engine.
B.
Set the HVAC controls as follows:
^
Air source: re-circulate
^
Heater control: full heat
^
Fan: high
^
A/C switch: off
^
Airflow (Face)
C.
Open one window approximately one half inch.
D.
Let the engine run for 15 minutes.
2.
Open the glove box and remove by lifting the left side and pulling the right side in a downward direction.
3.
Shake a bottle of Mazda Cooling Coil Coating well and attach it to the applicator, then connect the applicator to compressed shop air.
4.
Insert the applicator in the grille of the the recirculation door. Point the nozzle tip downwards and towards center (approximately the 7 o'clock
position).
