CX-7 AWD L4-2.3L Turbo (2008)
PATS light remains OFF and KEY light stays solid red.
53.
Insert second ignition key (without keycard) and turn to ON position (do not start engine). Count to 4 seconds and turn key to OFF position.
NOTE:
PATS light remains OFF and KEY light stays solid red.
54.
Start engine with second key to confirm programming.
55.
Turn engine OFF and remove key.
NOTE:
PATS light now flashes and KEY light continues to stay solid red.
56.
Start engine with first key to confirm programming.
57.
Turn engine OFF and remove key.
58.
Install start knob onto ignition switch.
59.
Ensure at least one Advance Key is in the vehicle. Turn ignition to ON position by pressing and turning start knob. DO NOT start engine.
60.
While still at the "Keyless and PATS Functions" screen, select "EXIT (From This Menu)". Press tick.
61.
Screen displays "Operator Action". Press X to exit (above tick).
62.
Screen shows "Vehicle Specification".
63. Select "FOLDER" tab at bottom. Select "COMPLETE (DELETES RECORDINGS)". Press tick.
64.
Turn ignition OFF and disconnect IDS from vehicle DLC.
65.
Remove start knob and confirm all keys start engine.
66.
Install start knob.
67.
Confirm Advance Key programming by starting engine with both keys. Place programmed card key more than 3 feet away from vehicle, then place
2nd programmed card key on passenger seat and start vehicle.
68.
Confirm Lock/Unlock functions work properly on each Advance Key.
69.
The configuration procedure is now completed.
