CX-7 AWD L4-2.3L Turbo (2008)
Headlamp Alignment Sensor: Testing and Inspection
AUTO LIGHT SENSOR INSPECTION
NOTE: Inspect the auto light sensor from the back side of the connector with the connector still connected.
1. Measure the voltage at auto light sensor terminal A and verify that the voltage is 5 V.
2. Shine a fluorescent light or expose the auto light sensor to natural sunlight.
3. Connect the positive (+) lead to terminal B and the negative (-) lead to terminal C of the auto light sensor, and verify that the voltages are as shown
in the table.
-
If the voltage is not as specified, replace the auto light sensor.