CX-7 AWD L4-2.3L Turbo (2008)
Wheel Fastener: Service and Repair
Rear Wheel Hub Bolt Replacement
REAR WHEEL HUB BOLT REPLACEMENT
1. Remove the brake caliper component and suspend it out of the way using a cable.
2. Remove the disc plate.
3. Remove the parking brake shoe.
4. Remove the wheel hub bolt using the SST as shown in the figure.
5. Place a new wheel hub bolt in the wheel hub.
6. Install the wheel hub by placing a proper sized washer on the hub, and tightening the nut as shown in the figure.
