CX-7 AWD L4-2.3L Turbo (2008)
-
When replacing a fuse, be sure to replace it with one of the same capacity. If a fuse fails again, the circuit probably has a short and the wiring
should be inspected.
-
Be sure the negative battery terminal is disconnected before replacing a main fuse.
-
When replacing a pullout fuse, use the fuse puller.
ELECTRICAL TROUBLESHOOTING TOOLS
Jumper Wire
-
A jumper wire is used to create a temporary circuit. Connect the jumper wire between the terminals of a circuit to bypass a switch.
Caution: Do not connect a jumper wire from the power source line to a body ground. This may cause burning or other damage to wiring
harnesses or electronic components.
Voltmeter
