CX-7 AWD L4-2.3L Turbo (2008)
4. Measure the current while waving a magnet back and forth over the top of the VSS (less than 5 mm (0.197 in)).
^
If there is any malfunction, replace the VSS.
VSS
VSS
5. Install the VSS.
6. Connect the negative battery cable.
7. Perform the mechanical system test. (See Mechanical System Test [AW6A-EL, AW6AX-EL] See: Transmission Control Systems/Testing and
Inspection/Initial Inspection and Diagnostic Overview/Mechanical System Test
