CX-7 AWD L4-2.3L Turbo (2008)
Canister Purge Solenoid: Component Tests and General Diagnostics
PURGE SOLENOID VALVE INSPECTION[L3 WITH TC]
Airflow Inspection
NOTE: Perform the following test only when directed.
1. Disconnect the negative battery cable.
2. Remove the purge solenoid valve.
3. Inspect airflow between the ports under the following conditions.
-
If not as specified, replace the purge solenoid valve.
-
If as specified, carry out the "Circuit Open/Short Inspection".
Circuit Open/Short Inspection
1. Disconnect the PCM connector.
