CX-7 AWD L4-2.3L Turbo (2008)
Fuel Line Coupler: Service and Repair
QUICK RELEASE CONNECTOR REMOVAL/INSTALLATION[L3 WITH TC]
WARNING: Fuel is very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and
facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure", while referring to
the "BEFORE SERVICE PRECAUTION".
Quick Release Connector Type
CAUTION: There are three types of quick release connectors. Verify the type and location, and install/remove properly.
Type A Removal
1. Follow "BEFORE REPAIR PROCEDURE" before performing any work operations to prevent fuel from spilling from the fuel system. (See
BEFORE REPAIR PROCEDURE[L3 WITH TC].)
CAUTION: The quick release connector may be damaged if the release tab is bent excessively. Do not expand the release tab over the
stopper.
NOTE: The fuel hose can be removed by pushing it to the pipe side to release the lock.
2. Rotate the release tab on the quick release connector to the stopper position.
