CX-7 AWD L4-2.3L Turbo (2008)
3. Pull out the fuel hose straight from the fuel pipe and disconnect it.
4. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to prevent it from scratches or dirt.
Type B Removal
CAUTION: Be careful not to damage the pipe when unlocking the retainer.
NOTE: When removing the quick connector, either SST 49 E042 001 or 49 NO13 103A.
When using SST 49 NO13 103A
1. Follow "BEFORE SERVICE PRECAUTION" and remove dirt from the connecting surfaces before performing and work operations. (See
BEFORE REPAIR PROCEDURE[L3 WITH TC].)
2. Insert the SST into the quick release connector.
3. Pull out the fuel hose straight from the fuel pipe and disconnect it.
4. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to prevent it from scratches or dirt.
When using SST 49 E042 001
NOTE: If the quick release connector is removed, replace the retainer with a new one.
1. Follow "BEFORE SERVICE PRECAUTION" and remove dirt from the connecting surfaces before performing any work operations. (See
BEFORE REPAIR PROCEDURE[L3 WITH TC].)
NOTE: The retainer is attached to the pipe even after the connector is disconnected.
